Installation Instructions

All ECO products can be easily installed on any engine. It is recommended that you
use a ECO installation quick connect kit to simplify your install(s). On Commercial
vehicles with a Water Seperator installation is quick and very easy using a JIC
connector, see first photo below. The ECO can be installed anywhere between the
fuel filter and the engines fuel intake (injectors).

Note: Please use Teflon Tape on all threaded surfaces
        *It is recommended to have a professional install your ECO Fuel System
        * For an improved results it is recommended to disconnect the Battery
           (30 min) to refresh the computer.

Links:

What size ECO do I need?

The ECO System® for your Application
ECO-2 for engines up to 5 liters
ECO-4 for engines over 5 liters and up to 400 HP
ECO-5 for engines over 400 HP
ECO-7 for Large applications Diesel & Natural Gas
(fuel lines .75, 1.5 inches in diameter

Who is using the ECO System?

Listed below are the most common installation applications. 

Coach Bus - Truck - Auto installations - Simple and Easy!

ECO Install1

Remove JIC fitting from Fuel Filter or Water Seperator and install ECO unit 
as shown above. Installations may require JIC 8 or JIC 10 fittings.

Water SEPARATOR Installations

WaterSeperatorPhoto  Water seperator resized

Installation Information .pdf (click here)

ECO #4 installation on a 2017 Dodge RAM

ECO #4 on a Cummins 6.7
 

 

klits

  Detailed Photos of Installations & Kits Printable PDF (click here)

1-ECO-002a2

 1-ECOKits3a

1-ECOKits4a

  1-ECOKits5a

1-ECOKits6a

1-ECOKits7a

1-ECOKits8a

  Click here for an easy to read printable .pdf 

1 Emission Reductions page resize2

Home