How to Clean an EGR Cooler
Save time and money!
Cobra Clean Degreaser
How to Clean an EGR Cooler:
Clock Time: 8 hrs
Personnel Time: 1/2 hr
Materials Cost: $30 for the first, $0 for 2 or 3 more
Clogged EGR Cooler
Get a 30 gallon Plastic Drum.
Get 2 bricks or 2 inch square tubing to place on the bottom of drum to set the DPF Filter on. A steel rack can also be used.
Place EGR cooler on top of rack and fill with Cobra Clean. You want enough Cobra Clean to completely submerge it.
Let soak over night.
The next day, remove cooler and place in wash area. Flush with water hose and spray nozzle until clean. Make sure to flush from all sides.
Let dry on a pallet or blow dry. (some use a wet vac.)
Reinstall and go for steak dinner with shop crew.
Use nitrile or vinyl gloves for hand protection.
Use standard shop eye protection.
Cobra Clean is non-caustic, non-acidic, and biodegradable.
Cobra Clean will not burn skin or clothing, but we recommend using protection due to potential skin sensitivity.
Use in a ventilated area.
Allow equipment to cool before cleaning.
Dispose of sludge and waste water properly.
For more information call (561) 395-1079
or go to our Contact page (click here)